|
|
|
National Stock Number:
5905-00-990-8345
Federal Supply Class:
5905
National Item Identification Number:
009908345
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 225027-21 | 37695 | RAYTHEON COMPANY | | 3300P1-500 | 80294 | BOURNS INSTRUMENTS INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 50.0 OHMS SINGLE SECTION | | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION | | BODY DIAMETER | 0.310 INCHES NOMINAL | | BODY LENGTH | 0.190 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | OVERALL DIAMETER | 0.310 INCHES NOMINAL | | OVERALL LENGTH | 0.690 INCHES NOMINAL | | MOUNTING METHOD | TERMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SECTION QUANTITY | 1 | | SPECIAL FEATURES | SCREWDRIVER SLOT ADJUSTMENT 0.025 INCH WIDE 0.100 INCH LONG SLOT | | TERMINAL LENGTH | 0.500 INCHES MINIMUM | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 PIN | | TEST DATA DOCUMENT | 49671-8486169 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|