5905-00-990-5398, RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-990-5398

Federal Supply Class:
5905

National Item Identification Number:
009905398

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

381-1721-020	95105	ROCKWELL COLLINS, INC.
8983168-105	49671	LOCKHEED MARTIN CORP LOCKHEED MARTIN INFORMATION SYSTEMS AUTOMATED SPARES
MIL-R-27208-4	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RT22C2P201	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
W41216D6400A6	C0426	HENSOLDT SENSORS GMBH

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	7200.0 MINIMUM AND 16200.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	200.0 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	STOPS
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
BODY HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
BODY LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
BODY WIDTH	0.200 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
CONTACT ARM ELECTRICAL OFF POSITION	FULLY CCW
OVERALL HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
OVERALL LENGTH	0.515 INCHES MINIMUM AND 0.555 INCHES MAXIMUM
OVERALL WIDTH	0.372 INCHES MINIMUM
MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES
MOUNTING METHOD	TERMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	7200.0 MINIMUM AND 16200.0 MAXIMUM
SECTION QUANTITY	1
SHAFT DIAMETER	0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
SHAFT LENGTH	0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
SPECIFICATION/STANDARD DATA	81349-MIL-R-27208/4 GOVERNMENT SPECIFICATION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
TERMINAL LENGTH	0.172 INCHES MINIMUM
TERMINAL LOCATION	LEFT ADJACENT SIDE SINGLE ROW
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	81349-MIL-R-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial