EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION |
ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
ACTUATOR TYPE | SINGLE SHAFT |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
BODY HEIGHT | 0.235 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
BODY LENGTH | 1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM |
BODY WIDTH | 0.235 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.109 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
OVERALL HEIGHT | 0.235 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
OVERALL LENGTH | 1.254 INCHES MINIMUM AND 1.359 INCHES MAXIMUM |
OVERALL WIDTH | 0.235 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
MOUNTING FACILITY QUANTITY | 2 |
MOUNTING HOLE DIAMETER | 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
MOUNTING METHOD | UNTHREADED HOLE |
POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION |
RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
RELIABILITY INDICATOR | NOT ESTABLISHED |
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0 TO 5.5 -55 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.0 -25 DEG CELSIUS SINGLE SECTION AND -2.0 TO 2.0 85 DEG CELSIUS SINGLE SECTION AND -5.0 TO 5.0 125 DEG CELSIUS SINGLE SECTION |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
SECTION QUANTITY | 1 |
SHAFT DIAMETER | 0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
SHAFT LENGTH | 0.036 INCHES MINIMUM AND 0.077 INCHES MAXIMUM |
SHAFT STYLE | ROUND, SLOTTED |
SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/1 GOVERNMENT SPECIFICATION |
TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
TEST DATA DOCUMENT | 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |