|
|
|
National Stock Number:
5905-00-841-0666
Federal Supply Class:
5905
National Item Identification Number:
008410666
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 10046686-1 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | 10046686-1 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 75.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 200.0 SINGLE SECTION | | BODY HEIGHT | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | BODY LENGTH | 1.163 INCHES MINIMUM AND 1.183 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | OVERALL HEIGHT | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | OVERALL LENGTH | 1.248 INCHES NOMINAL | | OVERALL WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.086 INCHES MINIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM | | SHAFT DIAMETER | 0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END | | TERMINAL LENGTH | 12.000 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
|
|