|
|
|
National Stock Number:
5905-00-838-3949
Federal Supply Class:
5905
National Item Identification Number:
008383949
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 11F145 | 02929 | NEWARK ELECTRONICS CORPORATION | | M22-11-00191FJ | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M22/11-00191FJ | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-22/11 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILR22-11 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | N0665 | 44655 | OHMITE HOLDING, L.L.C. | | RNS400 | 44655 | OHMITE HOLDING, L.L.C. | | RP401FJ501KK | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 390.0 SINGLE SECTION | | BODY DIAMETER | 6.090 INCHES NOMINAL | | BODY LENGTH | 2.410 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FIRST FLAT LENGTH | 1.500 INCHES MINIMUM | | FLAT HEIGHT | 0.344 INCHES NOMINAL | | OVERALL DIAMETER | 6.810 INCHES NOMINAL | | OVERALL LENGTH | 4.457 INCHES NOMINAL | | MAXIMUM STARTING TORQUE | 160.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 240.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING METHOD | THREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 300.0 HEAT SINK SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 310.0 MINIMUM AND 325.0 MAXIMUM | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 20.0 | | SCREW THREAD SERIES DESIGNATOR | UNC | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.375 INCHES NOMINAL | | SHAFT LENGTH | 2.000 INCHES NOMINAL | | SHAFT STYLE | ROUND, FLATTED | | SPECIAL FEATURES | TWO MTG HOLES SPACED 180 DEG ON 1.190 IN. RADIUS | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|