| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 354.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 45.0 |
| BODY DIAMETER | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| BODY LENGTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION TERMINAL BASE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 SINGLE SECTION |
| OVERALL DIAMETER | 2.219 INCHES NOMINAL |
| OVERALL LENGTH | 1.437 INCHES NOMINAL |
| MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING METHOD | THREADED HOLE |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.437 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.1200 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 2.1820 INCHES MINIMUM AND 2.1920 INCHES MAXIMUM |
| PILOT DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0570 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 3.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.125 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 1 |
| SHAFT BEARING TYPE | BALL |
| SHAFT END PLAY | 0.00500 INCHES |
| SHAFT DIAMETER | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.812 INCHES NOMINAL |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 177.0 SINGLE SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -0.5 TO 0.5 DEG ANGULAR ROTATION SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| UNDERCUT DIAMETER | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.5000 INCHES NOMINAL |