| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 353.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 2.500 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 60.0 |
| BODY DIAMETER | 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM |
| BODY LENGTH | 0.562 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION TERMINAL BASE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 SINGLE SECTION |
| OVERALL DIAMETER | 1.281 INCHES NOMINAL |
| OVERALL LENGTH | 1.062 INCHES NOMINAL |
| MAXIMUM STARTING TORQUE | 0.075 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING METHOD | THREADED HOLE |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.436 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| MOUNTING LIP DEPTH | 0.0560 INCHES MINIMUM AND 0.0640 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.0880 INCHES MINIMUM AND 1.0930 INCHES MAXIMUM |
| PILOT DIAMETER | 1.0295 INCHES MINIMUM AND 1.0300 INCHES MAXIMUM |
| PILOT LENGTH | 0.0380 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 HEAT SINK SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 7.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.086 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 56.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| SHAFT STYLE | ROUND, SLOTTED |
| SHAFT LENGTH | 0.500 INCHES NOMINAL |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -650.0 TO 650.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |
| UNDERCUT DIAMETER | 0.9975 INCHES MINIMUM AND 1.0025 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0580 INCHES MINIMUM AND 0.0660 INCHES MAXIMUM |