5905-00-811-6583 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5910-00-811-6586 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
5905-00-811-6584

Federal Supply Class:
5905

National Item Identification Number:
008116584

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
2100-04351LQK8KEYSIGHT TECHNOLOGIES, INC.
2100-043528480HEWLETT-PACKARD COMPANY
311-0041-0280009TEKTRONIX, INC.
311-0217-0080009TEKTRONIX, INC.
311-21780009TEKTRONIX, INC.
460-186252151CONTINENTAL ELECTRONICS CORP
BA1131-01171590CRL COMPONENTS INC
BA811-435871590CRL COMPONENTS INC
MIL-PRF-94/481349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILR94-481349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV2NAYSD105A81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION1.0 MEGOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
BODY DIAMETER0.890 INCHES MINIMUM AND 0.922 INCHES MAXIMUM
BODY LENGTH0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM
BODY STYLECYLINDRICAL BUSHING MOUNTED
DEVICE DESIGN TYPENONTURN AT 9 OCLOCK
NONTURN DEVICE RADIUS0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM
OVERALL DIAMETER1.274 INCHES MAXIMUM
OVERALL LENGTH1.281 INCHES MINIMUM AND 1.375 INCHES MAXIMUM
MAXIMUM STARTING TORQUE6.00 INCH-OUNCES
MAXIMUM STOP TORQUE128.00 INCH-OUNCES
MOUNTING BUSHING LENGTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
MOUNTING METHODSTANDARD BUSHING
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG251.0 MINIMUM AND 318.0 MAXIMUM
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
SHAFT LENGTH0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA81349-MIL-R-94/2 GOVERNMENT SPECIFICATION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
TEST DATA DOCUMENT81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial