4710-00-811-4376 TUBE ASSEMBLY,METAL Index 5905-00-811-4381 RESISTOR,FIXED,COMPOSITION

National Stock Number:
5905-00-811-4379

Federal Supply Class:
5905

National Item Identification Number:
008114379

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
224S1-78280294BOURNS INSTRUMENTS INC
224S814-78280294BOURNS INSTRUMENTS INC
900401-106481NORTHROP GRUMMAN SYSTEMS CORPORATION


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION7.8 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER175.0 SINGLE SECTION
BODY HEIGHT0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
BODY LENGTH1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
BODY WIDTH0.170 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
OVERALL HEIGHT0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
OVERALL LENGTH1.420 INCHES MINIMUM AND 1.520 INCHES MAXIMUM
OVERALL WIDTH0.170 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
MAXIMUM STARTING TORQUE5.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.086 INCHES MINIMUM
MOUNTING METHODUNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG7920.0 NOMINAL
SECTION QUANTITY1
SHAFT LENGTH0.040 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
SHAFT DIAMETER0.105 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-70.0 TO 70.0 SINGLE SECTION
TERMINAL LOCATIONREAR END
TERMINAL TYPE AND QUANTITY3 WIRE LOOP


Click here to Register for Free 30-day Trial