5905-00-811-0226 RESISTOR,FIXED,WIRE WOUND,INDUCT Index 5905-00-811-0228 RESISTOR,FIXED,WIRE WOUND,INDUCT

National Stock Number:
5905-00-811-0227

Federal Supply Class:
5905

National Item Identification Number:
008110227

Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT

Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.


Manufacturer Information:
G213552-364959AMERICAN TELEPHONE AND TELEGRAPH CO
G213552-392663AT AND T CO ADVANCED TECHNOLOGY SYSTEMS
RH-50,5000HMSP0RM3PCT91637VISHAY DALE ELECTRONICS, LLC
RH-50,500OHMSPORM3PCT91637VISHAY DALE ELECTRONICS, LLC
RH50-501H91637VISHAY DALE ELECTRONICS, LLC


Techincal Specification:
ELECTRICAL RESISTANCE500.000 OHMS
AMBIENT TEMP AT FULL RATED POWER25.0 CELSIUS
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER275.0
BODY HEIGHT0.625 INCHES NOMINAL
BODY LENGTH1.969 INCHES NOMINAL
BODY WIDTH0.625 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH1.563 INCHES NOMINAL
HEAT SINK LENGTH12.000 INCHES
HEAT SINK THICKNESS0.059 INCHES
HEAT SINK WIDTH12.000 INCHES
INCLOSURE TYPEENCASED
MATERIALALUMINUM ALLOY HEAT SINK
MOUNTING HOLE SIZE0.125 INCHES NOMINAL
POWER DISSIPATION RATING IN WATTS20.000 FREE AIR
RESISTANCE TOLERANCE IN PERCENT-3.000 TO 3.000
RELIABILITY INDICATORNOT ESTABLISHED
STYLE DESIGNATORAXIAL TERMINAL (S)
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-20.0 TO 20.0
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-55.0 TO 275.0
TERMINAL LENGTH0.406 INCHES NOMINAL
TERMINAL TYPETAB, SOLDER LUG
TEST DATA DOCUMENT92663-G213552-3 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)


Click here to Register for Free 30-day Trial