6220-00-809-8453 LIGHT,MARKER,CLEARANCE Index 5905-00-809-8456 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-809-8454

Federal Supply Class:
5905

National Item Identification Number:
008098454

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
M22/11-00151FJ81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-22/1181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILR22-1181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILR22-11-00151F81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RP401FJ151KK81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION150.0 OHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER390.0 SINGLE SECTION
BODY DIAMETER6.090 INCHES MAXIMUM
BODY LENGTH2.410 INCHES MAXIMUM
BODY STYLECYLINDRICAL HOLE/SLOT MOUNTED
FIRST FLAT LENGTH1.500 INCHES MINIMUM
FLAT HEIGHT0.344 INCHES NOMINAL
NONTURN DEVICE LOCATIONAT 3 OCLOCK AND AT 9 OCLOCK
OVERALL DIAMETER6.810 INCHES MAXIMUM
OVERALL LENGTH4.457 INCHES MAXIMUM
MAXIMUM STARTING TORQUE160.00 INCH-OUNCES
MAXIMUM STOP TORQUE240.00 INCH-OUNCES
MOUNTING BUSHING LENGTH0.375 INCHES NOMINAL
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE/STUD CIRCLE DIAMETER2.380 INCHES NOMINAL
MOUNTING METHODTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS300.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG310.0 MINIMUM AND 325.0 MAXIMUM
SCREW THREAD QUANTITY PER INCH20.0
SCREW THREAD SERIES DESIGNATORUNC
SCREW THREAD DIAMETER0.250 INCHES NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.375 INCHES NOMINAL
SHAFT STYLEROUND, FLATTED
SHAFT LENGTH0.375 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA81349-MIL-R-22/11 GOVERNMENT SPECIFICATION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
TEST DATA DOCUMENT81349-MIL-R-22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial