5905-00-809-5029 RESISTOR,FIXED,WIRE WOUND Index 5905-00-809-5032 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-809-5031

Federal Supply Class:
5905

National Item Identification Number:
008095031

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
2020706-1110001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
236L11-50180294BOURNS INSTRUMENTS INC


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION500.0 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY HEIGHT0.360 INCHES NOMINAL
BODY LENGTH1.340 INCHES NOMINAL
BODY WIDTH0.270 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM
OVERALL HEIGHT0.360 INCHES NOMINAL
OVERALL LENGTH1.370 INCHES NOMINAL
OVERALL WIDTH0.270 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
MAXIMUM STARTING TORQUE7.50 INCH-OUNCES
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.086 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
MOUNTING METHODUNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS0.8 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG9000.0 NOMINAL
SECTION QUANTITY1
SHAFT LENGTH0.031 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
SHAFT DIAMETER0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-30.0 TO 30.0 SINGLE SECTION
TERMINAL LOCATIONREAR END
TERMINAL TYPE AND QUANTITY3 WIRE LEAD
TEST DATA DOCUMENT10001-2020706 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)


Click here to Register for Free 30-day Trial