| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 1800.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS 1ST SECTION AND 5.0 KILOHMS 2ND SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| BODY LENGTH | 2.292 INCHES MINIMUM AND 2.327 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| FIXED TAP QUANTITY PER SECTION | 1 2ND SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | 1ST SECTION ZERO BASED LINEARITY AND 2ND SECTION TERMINAL BASE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 1ST SECTION AND -0.20 TO 0.20 2ND SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| OVERALL DIAMETER | 1.085 INCHES NOMINAL |
| OVERALL LENGTH | 2.702 INCHES MINIMUM AND 2.791 INCHES MAXIMUM |
| MAXIMUM STARTING TORQUE | 1.40 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 160.00 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 1.20 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT LENGTH | 0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| PILOT DIAMETER | 0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.9 FREE AIR ALL SECTIONS AND 0.5 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1800.0 NOMINAL |
| SECTION QUANTITY | 2 |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT DIAMETER | 0.624 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.358 INCHES MINIMUM AND 0.392 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.624 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| TAP LOCATION TOLERANCE PER SECTION | -5.0 TO 5.0 OHMS ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD |