5340-00-808-5730 RING,RETAINING Index 5365-00-808-5734 BUSHING,NONMETALLIC

National Stock Number:
5905-00-808-5731

Federal Supply Class:
5905

National Item Identification Number:
008085731

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
65LT34263CTS CORP IN TEXAS DBA CTS ELECTRONICS CORP BROWNSVILLE DIV
GH3794-228528ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST
MIL-PRF-94/281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILR9481349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV5LAYSB504C81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION500.000 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
BODY DIAMETER0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
BODY LENGTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
BODY STYLECYLINDRICAL BUSHING MOUNTED
DEVICE DESIGN TYPENONTURN AT 9 OCLOCK
NONTURN DEVICE RADIUS0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
OVERALL DIAMETER0.953 INCHES MAXIMUM
OVERALL LENGTH0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM
MAXIMUM STARTING TORQUE6.00 INCH-OUNCES
MAXIMUM STOP TORQUE80.00 INCH-OUNCES
MOUNTING BUSHING LENGTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
MOUNTING METHODLOCKING BUSHING
POWER DISSIPATION RATING PER SECTION IN WATTS0.25 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG295.0 MINIMUM AND 305.0 MAXIMUM
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD DIAMETER0.250 INCHES NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
SHAFT LENGTH0.469 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG


Click here to Register for Free 30-day Trial