5905-00-808-1844 RESISTOR,VARIABLE,WIRE WOUND,NON Index 5905-00-808-1855 RESISTOR,FIXED,WIRE WOUND,INDUCT

National Stock Number:
5905-00-808-1845

Federal Supply Class:
5905

National Item Identification Number:
008081845

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
220W810-10380294BOURNS INSTRUMENTS INC
692X000B10001K91637VISHAY DALE ELECTRONICS, LLC
900024-3902111VISHAY SPRAGUE INC
900024-3906481NORTHROP GRUMMAN SYSTEMS CORPORATION
900024-39C7407IV-ELECTRONIC KLAUS VESPERMANN KG


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECLUTCH
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER175.0 SINGLE SECTION
BODY HEIGHT0.305 INCHES MINIMUM AND 0.325 INCHES MAXIMUM
BODY LENGTH0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM
BODY WIDTH0.140 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
OVERALL HEIGHT0.305 INCHES MINIMUM AND 0.325 INCHES MAXIMUM
OVERALL LENGTH1.075 INCHES NOMINAL
OVERALL WIDTH0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
MAXIMUM STARTING TORQUE5.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.086 INCHES MINIMUM
MOUNTING METHODUNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG5760.0 NOMINAL
SECTION QUANTITY1
SHAFT LENGTH0.075 INCHES MAXIMUM
SHAFT DIAMETER0.080 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-70.0 TO 70.0 SINGLE SECTION
TERMINAL LOCATIONREAR END
TERMINAL TYPE AND QUANTITY3 WIRE LEAD


Click here to Register for Free 30-day Trial