5905-00-808-1836 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5905-00-808-1839 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-808-1837

Federal Supply Class:
5905

National Item Identification Number:
008081837

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
121-0506-388818KEARFOTT CORPORATION
43MT102KA1B3S12412697CLAROSTAT SENSORS AND CONTROLS


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION295.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION1.0 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
BODY DIAMETER1.250 INCHES MINIMUM AND 1.281 INCHES MAXIMUM
BODY LENGTH0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
BODY STYLECYLINDRICAL BUSHING MOUNTED
NONTURN DEVICE LOCATIONAT 9 OCLOCK
NONTURN DEVICE RADIUS0.516 INCHES MINIMUM AND 0.547 INCHES MAXIMUM
MOUNTING BUSHING LENGTH0.375 INCHES NOMINAL
MOUNTING METHODSTANDARD BUSHING
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG295.0 NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
SHAFT LENGTH1.734 INCHES MINIMUM AND 1.766 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-170.0 TO 170.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG


Click here to Register for Free 30-day Trial