| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 358.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 200.0 OHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 45.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| BODY DIAMETER | 2.990 INCHES MINIMUM AND 3.000 INCHES MAXIMUM |
| BODY LENGTH | 0.797 INCHES MINIMUM AND 1.049 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15 TO 0.15 SINGLE SECTION |
| OVERALL LENGTH | 1.329 INCHES MINIMUM AND 1.705 INCHES MAXIMUM |
| MAXIMUM STARTING TORQUE | 1.30 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 2.250 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 2.9900 INCHES MINIMUM AND 3.0000 INCHES MAXIMUM |
| MOUNTING METHOD | THREADED HOLE |
| PILOT DIAMETER | 2.8740 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 7.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.594 INCHES NOMINAL |
| UNDERCUT DIAMETER | 2.875 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |