|
|
|
National Stock Number:
5905-00-807-7507
Federal Supply Class:
5905
National Item Identification Number:
008077507
Description:
RESISTOR,FIXED,COMPOSITION
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of a mixture of carbon, an insulating material, and suitable binders, either molded together or applied as a thin layer of conducting material on an insulated form. The opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the item itself. See also ATTENUATOR, FIXED; RESISTOR, FIXED, FILM; and RESISTOR, THERMAL. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
|
Manufacturer Information:
| 041-553 | 92739 | AMPEX SYSTEMS CORP | | 0686-1215 | 1MY97 | AGILENT TECHNOLOGIES, INC. | | 0686-1215 | 28480 | HEWLETT-PACKARD COMPANY | | 10011-121 | 52542 | SYSTRON-DONNER CORP MICROWAVE/INSTRUMENT DIV | | 111323-121 | 90536 | LOCKHEED MARTIN CORP | | 50AB-121J | 0ZBJ4 | PHILIPS NORTH AMERICA LLC | | 50AB-121J | 52983 | HEWLETT-PACKARD CO WALTHAM DIV | | 813186-27 | 56232 | LOCKHEED MARTIN CORPORATION | | EB1215 | 01121 | ROCKWELL AUTOMATION, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 120.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 70.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY DIAMETER | 0.132 INCHES MINIMUM AND 0.148 INCHES MAXIMUM | | BODY LENGTH | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM | | CUBIC MEASURE | 0.007 CUBIC INCHES | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.500 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TERMINAL LENGTH | 1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 90536-111323-121 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|