| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 12.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 365.0 SINGLE SECTION |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 30.0 |
| BODY DIAMETER | 2.016 INCHES MAXIMUM |
| BODY LENGTH | 0.968 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG COSINE |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 SINGLE SECTION |
| OVERALL DIAMETER | 2.208 INCHES MAXIMUM |
| OVERALL LENGTH | 1.718 INCHES NOMINAL |
| MAXIMUM RUNNING TORQUE | 1.10 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.082 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 2.0160 INCHES MAXIMUM |
| MOUNTING METHOD | THREADED HOLE |
| PILOT DIAMETER | 1.8750 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.25 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 1.874 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| SHAFT LENGTH | 0.750 INCHES NOMINAL |
| SHAFT STYLE | ROUND |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 5 TURRET |
| TEST DATA DOCUMENT | 10001-2042042 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.875 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES MINIMUM |