5905-00-784-5846, RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-784-5846

Federal Supply Class:
5905

National Item Identification Number:
007845846

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

MILR22097-3	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RJ22BL105	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	7200.0 MINIMUM AND 16200.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	1.000 MEGOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION
BODY HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
BODY LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES
BODY WIDTH	0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM
OVERALL HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
OVERALL LENGTH	0.515 INCHES MINIMUM AND 0.555 INCHES MAXIMUM
OVERALL WIDTH	0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY	2
MOUNTING HOLE DIAMETER	0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
MOUNTING METHOD	UNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS	0.25 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	7200.0 MINIMUM AND 16200.0 MAXIMUM
SECTION QUANTITY	1
SHAFT DIAMETER	0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM
SHAFT LENGTH	0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-600.0 TO 600.0 SINGLE SECTION
TERMINAL LOCATION	REAR END
TERMINAL TYPE AND QUANTITY	3 WIRE LEAD
TEST DATA DOCUMENT	81349-MILR22097-3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial