5905-00-784-2200 RESISTOR,VARIABLE,WIRE WOUND,NON Index 4110-00-784-2203 RESERVOIR ASSEMBLY

National Stock Number:
5905-00-784-2201

Federal Supply Class:
5905

National Item Identification Number:
007842201

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
2054810112GENERAL DYNAMICS MOTION CONTROL LLC
2054898659DONEL SYSTEMS LLC
900217-23906481NORTHROP GRUMMAN SYSTEMS CORPORATION
KC11-01X3-800404454SENSOR SYSTEMS, L.L.C.


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION353.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION1.0 MEGOHMS 1ST SECTION
ELECTRICAL RESISTANCE PER SECTION1.0 MEGOHMS 2ND SECTION
ELECTRICAL RESISTANCE PER SECTION300.0 KILOHMS 3RD SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 1ST SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 2ND SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER90.0 3RD SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 ALL SECTIONS
BODY DIAMETER1.094 INCHES NOMINAL
BODY LENGTH1.260 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FIXED TAP QUANTITY PER SECTION1 ALL SECTIONS
FUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS EQUATION
FUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE CONFORMITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-2.00 TO 2.00 1ST SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-2.00 TO 2.00 2ND SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-3.00 TO 3.00 3RD SECTION
MAXIMUM RUNNING TORQUE0.80 INCH-OUNCES
MAXIMUM STARTING TORQUE0.90 INCH-OUNCES
MOUNTING LIP DEPTH0.0600 INCHES NOMINAL
MOUNTING LIP DIAMETER1.0940 INCHES NOMINAL
MOUNTING METHODCLAMP RING
PILOT DIAMETER1.0300 INCHES NOMINAL
PILOT LENGTH0.0400 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS0.25 FREE AIR 3RD SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR 1ST SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR 2ND SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-0.01 TO 0.01 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY3
SHAFT DIAMETER0.125 INCHES NOMINAL
SHAFT LENGTH0.500 INCHES NOMINAL
SHAFT STYLEROUND, SLOTTED
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION60.0 ALL SECTIONS
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS150000.0 2ND SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS500000.0 1ST SECTION
TAP LOCATION TOLERANCE PER SECTION-1.0 TO 1.0 DEG ANGULAR ROTATION ALL SECTIONS
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-400.0 TO 400.0 ALL SECTIONS
TERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY12 TURRET
UNDERCUT DIAMETER1.030 INCHES NOMINAL
UNDERCUT WIDTH0.0600 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us