|
|
|
National Stock Number:
5905-00-782-8315
Federal Supply Class:
5905
National Item Identification Number:
007828315
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 260L1-101M | 80294 | BOURNS INSTRUMENTS INC | | 3057L-1-101M | 32997 | BOURNS INC | | K673856-1 | 84955 | KAMAN AEROSPACE CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 100.000 OHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION | | BODY HEIGHT | 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM | | BODY LENGTH | 1.296 INCHES MINIMUM AND 1.328 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY WIDTH | 0.250 INCHES MINIMUM AND 0.282 INCHES MAXIMUM | | FRAGILITY FACTOR | MODERATELY RUGGED | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.088 INCHES MINIMUM | | MOUNTING METHOD | STANDARD BUSHING AND UNTHREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7920.0 NOMINAL | | SCREW THREAD DIAMETER | 0.190 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNF | | SECTION QUANTITY | 1 | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION | | TERMINAL LENGTH | 11.500 INCHES MINIMUM | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
|
|