5905-00-780-2622 RESISTOR,FIXED,WIRE WOUND,NONIND Index 5905-00-780-2625 RESISTOR,FIXED,FILM

National Stock Number:
5905-00-780-2623

Federal Supply Class:
5905

National Item Identification Number:
007802623

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
4171788-04705869RAYTHEON COMPANY
MILR22097-181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RJ11CP20281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION6120.0 MINIMUM AND 9720.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION2.000 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECLUTCH
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BODY HEIGHT0.280 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
BODY LENGTH1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
BODY WIDTH0.235 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.680 INCHES MINIMUM AND 0.720 INCHES MAXIMUM
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
OVERALL HEIGHT0.749 INCHES MINIMUM AND 0.998 INCHES MAXIMUM
OVERALL LENGTH1.254 INCHES MINIMUM AND 1.359 INCHES MAXIMUM
OVERALL WIDTH0.235 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
MAXIMUM STARTING TORQUE8.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
MOUNTING METHODUNTHREADED HOLE AND TERMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS0.8 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG6120.0 MINIMUM AND 9720.0 MAXIMUM
SECTION QUANTITY1
SHAFT DIAMETER0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
SHAFT LENGTH0.036 INCHES MINIMUM AND 0.077 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-250.0 TO 250.0 SINGLE SECTION
TERMINAL LENGTH0.469 INCHES MINIMUM AND 0.624 INCHES MAXIMUM
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
TERMINAL TYPE AND QUANTITY3 PIN
TEST DATA DOCUMENT81349-MILR22097-1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us