|
|
|
National Stock Number:
5905-00-769-0673
Federal Supply Class:
5905
National Item Identification Number:
007690673
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 2068430-0701 | 27914 | HONEYWELL INTERNATIONAL INC DBA HONEYWELL | | 3200-1184-1 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. | | 570-8062 | 02111 | VISHAY SPRAGUE INC | | 570-8062 | C7407 | IV-ELECTRONIC KLAUS VESPERMANN KG |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 750.000 OHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 60.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION | | BODY DIAMETER | 0.875 INCHES NOMINAL | | BODY LENGTH | 1.620 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FEATURES PROVIDED | NONMETALLIC SHAFT | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05 TO 0.05 SINGLE SECTION | | OVERALL LENGTH | 2.120 INCHES NOMINAL | | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0625 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 0.8910 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER | 0.6250 INCHES NOMINAL | | PILOT LENGTH | 0.0625 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.15 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM | | SECTION QUANTITY | 1 | | SHAFT END PLAY | 0.00200 INCHES | | SHAFT BEARING TYPE | BALL | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT LENGTH | 0.500 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT RUNOUT | 0.0005 INCHES | | SHAFT STYLE | ROUND | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL LENGTH | 0.190 INCHES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD | | TEST DATA DOCUMENT | 06845-2068430 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 0.859 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0625 INCHES NOMINAL |
|
|