|
|
|
National Stock Number:
5905-00-764-0423
Federal Supply Class:
5905
National Item Identification Number:
007640423
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| MILR22097-1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RJ11BP104 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9720.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 100.000 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY HEIGHT | 0.300 INCHES NOMINAL | | BODY LENGTH | 1.282 INCHES NOMINAL | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY WIDTH | 0.300 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.510 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.105 INCHES NOMINAL | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.160 INCHES NOMINAL | | OVERALL HEIGHT | 0.300 INCHES NOMINAL | | OVERALL LENGTH | 1.359 INCHES NOMINAL | | OVERALL WIDTH | 0.300 INCHES NOMINAL | | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.098 INCHES NOMINAL | | MOUNTING METHOD | UNTHREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9720.0 MAXIMUM | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.077 INCHES NOMINAL | | SHAFT DIAMETER | 0.140 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -600.0 TO 600.0 SINGLE SECTION | | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS | | TERMINAL LENGTH | 0.624 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 3 PIN | | TEST DATA DOCUMENT | 81349-MILR22097-1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|