|
|
|
National Stock Number:
5905-00-763-5372
Federal Supply Class:
5905
National Item Identification Number:
007635372
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 220025P36 | 94117 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 3280W66-502 | 80294 | BOURNS INSTRUMENTS INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION | | BODY HEIGHT | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | BODY LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY WIDTH | 0.188 INCHES MINIMUM AND 0.219 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.406 INCHES NOMINAL | | MOUNTING FACILITY QUANTITY | 1 | | MOUNTING HOLE DIAMETER | 0.074 INCHES MINIMUM | | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | SHAFT DIAMETER | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION | | TERMINAL LENGTH | 0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM | | TERMINAL LOCATION | LEFT ADJACENT SIDE TWO ROWS | | TERMINAL TYPE AND QUANTITY | 3 PIN |
|
|