|
|
|
National Stock Number:
5905-00-763-2522
Federal Supply Class:
5905
National Item Identification Number:
007632522
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 138-063-0004 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 88755 | 01121 | ROCKWELL AUTOMATION, INC. | | JJC88755 | 01121 | ROCKWELL AUTOMATION, INC. | | JJC88755 | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 1ST SECTION AND 2.5 KILOHMS 2ND SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS | | BODY DIAMETER | 1.156 INCHES MAXIMUM | | BODY LENGTH | 1.266 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | FLAT HEIGHT | 0.094 INCHES MINIMUM AND 0.216 INCHES MAXIMUM | | FRAGILITY FACTOR | MODERATELY RUGGED | | OVERALL DIAMETER | 1.156 INCHES MAXIMUM | | OVERALL LENGTH | 2.766 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.125 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | SHAFT STYLE | ROUND, STEPPED | | SHAFT LENGTH | 1.100 INCHES MINIMUM AND 1.500 INCHES MAXIMUM | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 95542-138-063 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT LENGTH | 0.550 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.063 INCHES NOMINAL |
|
|