| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 MINIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 80.000 KILOHMS 1ST SECTION AND 80.000 KILOHMS 2ND SECTION AND 80.000 KILOHMS 3RD SECTION AND 500.000 OHMS 4TH SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 90.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| BODY DIAMETER | 1.755 INCHES MAXIMUM |
| BODY LENGTH | 2.485 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | HUMIDITY PROOF |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20 TO 0.20 ALL SECTIONS |
| OVERALL DIAMETER | 2.156 INCHES NOMINAL |
| OVERALL LENGTH | 4.485 INCHES NOMINAL |
| MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 4.50 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 4 |
| MOUNTING METHOD | THREADED HOLE |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| MOUNTING LIP DEPTH | 0.09300 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.75500 INCHES MAXIMUM |
| PILOT DIAMETER | 0.49500 INCHES MINIMUM AND 0.50500 INCHES MAXIMUM |
| PILOT LENGTH | 0.10900 INCHES MINIMUM AND 0.14100 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD AND TERMINALS SILVER |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 1ST SECTION AND -1.0 TO 1.0 2ND SECTION AND -1.0 TO 1.0 3RD SECTION AND -5.0 TO 5.0 4TH SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 4 |
| SHAFT BEARING TYPE | BALL |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 12 SOLDER STUD |
| UNDERCUT DIAMETER | 1.625 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.07300 INCHES NOMINAL |