| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 1ST SECTION AND 80.000 KILOHMS 2ND SECTION AND 80.000 KILOHMS 3RD SECTION AND 4.000 KILOHMS 4TH SECTION AND 4.000 KILOHMS 5TH SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| BODY DIAMETER | 1.755 INCHES MAXIMUM |
| BODY LENGTH | 4.219 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | SWITCH |
| FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION AND 1 2ND SECTION AND 1 3RD SECTION AND 1 4TH SECTION AND 1 5TH SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30 TO 0.30 ALL SECTIONS |
| OVERALL DIAMETER | 2.002 INCHES NOMINAL |
| OVERALL LENGTH | 5.344 INCHES NOMINAL |
| MAXIMUM RUNNING TORQUE | 4.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 6.50 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 4 |
| MOUNTING METHOD | THREADED HOLE |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 2.0620 INCHES MAXIMUM |
| SPECIAL FEATURES | 3 SWITCH SECTIONS |
| PILOT DIAMETER | 0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM |
| PILOT LENGTH | 0.1250 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 5 |
| SHAFT BEARING TYPE | BALL |
| SHAFT LENGTH | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| SWITCH CURRENT TYPE AND RATING IN AMPS | 0.500 DC AND 0.001 DC AND 0.010 DC |
| SWITCH OPERATING POSITION | START OF LINEAR MOVEMENT |
| SWITCH TYPE | ROTARY |
| SWITCH VOLTAGE RATING IN VOLTS | 35.0 AND 250.0 |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 175.0 ALL SECTIONS |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 25000.0 1ST SECTION AND 40000.0 2ND SECTION AND 40000.0 3RD SECTION AND 2000.0 4TH SECTION AND 2000.0 5TH SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 26 TAB, SOLDER LUG |
| UNDERCUT DIAMETER | 1.750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |