|
|
|
National Stock Number:
5905-00-723-9129
Federal Supply Class:
5905
National Item Identification Number:
007239129
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
| 101-3568750HMSP0RM-05PCT | 15584 | TANGER ELECTRONICS A DIV OF VERIT INDUSTRIES | | 7010-3568750HMSP0RM-05PCT | 05347 | ULTRONIX INC | | 7010-3568750HMSP0RM5PCT | 54294 | SHALLCROSS INC | | 7010-356875OHMSPORM5PCT | 54294 | SHALLCROSS INC | | A2550-3568750HMSP0RM-05PCT | 53655 | AVOX SYSTEMS INC | | EP21-3568750HMSP0RM-05PCT | 19587 | KELVIN INDUSTRIES INC | | G310025S38 | 24930 | L3HARRIS TECHNOLOGIES, INC | | VA12-3568750HMSP0RM5PCT | 54294 | SHALLCROSS INC | | VA12-356875OHMSPORM5PCT | 54294 | SHALLCROSS INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 356.875 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 | | BODY DIAMETER | 0.250 INCHES NOMINAL | | BODY LENGTH | 0.500 INCHES NOMINAL | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.250 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -0.050 TO 0.050 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 145.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -5.0 TO 5.0 | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 24930-G-310025S38 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|