| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 15.000 KILOHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| BODY DIAMETER | 0.875 INCHES NOMINAL |
| BODY LENGTH | 1.562 INCHES MINIMUM AND 1.580 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 3 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05 TO 0.05 SINGLE SECTION |
| OVERALL LENGTH | 2.156 INCHES MINIMUM AND 2.236 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0 |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 0.87500 INCHES NOMINAL |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER | 0.62400 INCHES MINIMUM AND 0.62500 INCHES MAXIMUM |
| PILOT LENGTH | 0.06200 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM |
| SECTION QUANTITY | 1 |
| SHAFT BEARING TYPE | BALL |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| TAP LOCATION TOLERANCE PER SECTION | -2.0 TO 2.0 DEG ANGULAR ROTATION 1ST SECTION AND -10.0 TO 20.0 DEG ANGULAR ROTATION 2ND SECTION AND -10.0 TO 10.0 DEG ANGULAR ROTATION 3RD SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |
| TEST DATA DOCUMENT | 24930-123081 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 0.750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.05700 INCHES MINIMUM |