|
|
|
National Stock Number:
5905-00-723-3185
Federal Supply Class:
5905
National Item Identification Number:
007233185
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 280MR033P196 | 3B150 | RAYTHEON COMPANY | | 280MR033P196 | 49956 | RAYTHEON COMPANY | | 280MR033P196 | 54X10 | RAYTHEON COMPANY | | PRH250-4992F | 80031 | MEPCO/ELECTRA INC | | S280MR033P196ISSUE4 | 3B150 | RAYTHEON COMPANY | | S280MR033P196ISSUE4 | 49956 | RAYTHEON COMPANY | | S280MR033P196ISSUE4 | 54X10 | RAYTHEON COMPANY |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 49.900 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 70.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY DIAMETER | 0.249 INCHES NOMINAL | | BODY LENGTH | 0.655 INCHES NOMINAL | | CUBIC MEASURE | 0.007 CUBIC INCHES | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.250 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 25.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -285.0 TO 383.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -350.0 TO 450.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | +25.0 TO 105.0 | | TERMINAL LENGTH | 1.500 INCHES NOMINAL | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 05030-S280MR33 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNPACKAGED UNIT WEIGHT | 0.840 GRAMS |
|
|