|
|
|
National Stock Number:
5905-00-719-9469
Federal Supply Class:
5905
National Item Identification Number:
007199469
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 116020-000 | 81413 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 4.5 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 100.0 SINGLE SECTION | | BODY DIAMETER | 1.000 INCHES NOMINAL | | BODY LENGTH | 0.859 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FRAGILITY FACTOR | MODERATELY RUGGED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG SINE-COSINE | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION | | LATERAL RUNOUT | 0.001 INCHES | | OVERALL LENGTH | 1.739 INCHES MAXIMUM | | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.0000 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER | 0.8750 INCHES NOMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | BEARING | | SHAFT END PLAY | 0.005 INCHES | | SHAFT DIAMETER | 0.1247 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.656 INCHES NOMINAL | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0/-300.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 6 TURRET | | TEST DATA DOCUMENT | 81413-116020-000 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 0.875 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0600 INCHES NOMINAL |
|
|