| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3610.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 30.0 |
| BODY DIAMETER | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| BODY LENGTH | 1.563 INCHES MINIMUM AND 1.583 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.40 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING METHOD | THREADED HOLE |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.112 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.06800 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.00000 INCHES NOMINAL |
| PILOT DIAMETER | 0.87500 INCHES NOMINAL |
| PILOT LENGTH | 0.06200 INCHES NOMINAL |
| PILOT DIAMETER RUNOUT | 0.00200 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 3.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM AND 3610.0 MAXIMUM |
| SCREW THREAD DIAMETER | 0.112 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 40.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 1 |
| SHAFT END PLAY | 0.00500 INCHES |
| SHAFT DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | UPPER ADJACENT SIDE SINGLE ROW |
| TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| UNDERCUT DIAMETER | 0.875 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.06200 INCHES NOMINAL |