|
|
|
National Stock Number:
5905-00-688-4378
Federal Supply Class:
5905
National Item Identification Number:
006884378
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 208252 | 0KDP7 | KIDDE-FENWAL, INC. | | 208252 | 61423 | KIDDE TECHNOLOGIES, INC | | 8P1035TYPE650 | 11237 | CTS CORP OF CALIFORNIA DBA CTS ELECTRONICS CORP PASO ROBLES DIV ELECTROMECHANICAL GROUP | | TU5012S20 | 35627 | PRECISION ELECTRONICS CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM | | BODY LENGTH | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | FRAGILITY FACTOR | MODERATELY RUGGED | | OVERALL DIAMETER | 0.922 INCHES NOMINAL | | OVERALL LENGTH | 1.000 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | SHAFT LENGTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|