|
|
|
National Stock Number:
5905-00-681-8930
Federal Supply Class:
5905
National Item Identification Number:
006818930
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| B2220572 | 28527 | L3HARRIS TECHNOLOGIES, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 2.500 KILOHMS 1ST SECTION | | ELECTRICAL RESISTANCE PER SECTION | 2.500 OHMS 2ND SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM | | BODY LENGTH | 0.813 INCHES MINIMUM AND 0.875 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | OVERALL DIAMETER | 1.031 INCHES MINIMUM AND 1.094 INCHES MAXIMUM | | OVERALL LENGTH | 1.231 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE LOCATION | AT 9 OCLOCK | | NONTURN DEVICE RADIUS | 0.234 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | SHAFT LENGTH | 0.438 INCHES NOMINAL | | SHAFT STYLE | ROUND | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
|
|