|
|
|
National Stock Number:
5905-00-681-3886
Federal Supply Class:
5905
National Item Identification Number:
006813886
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 236L1-502 | 80294 | BOURNS INSTRUMENTS INC | | 7717791P9 | 03538 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY HEIGHT | 0.360 INCHES MAXIMUM | | BODY LENGTH | 1.406 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY WIDTH | 0.220 INCHES NOMINAL | | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL | | OVERALL HEIGHT | 0.360 INCHES NOMINAL | | OVERALL WIDTH | 0.300 INCHES NOMINAL | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING METHOD | UNTHREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT LENGTH | 0.062 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | SPECIAL FEATURES | W/SCREWDRIVER ADJUSTMENT | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
|
|