|
|
|
National Stock Number:
5905-00-678-0113
Federal Supply Class:
5905
National Item Identification Number:
006780113
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 500567-100 | 04454 | SENSOR SYSTEMS, L.L.C. | | MICR0P0T990L100 | 04454 | SENSOR SYSTEMS, L.L.C. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 100.000 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY HEIGHT | 0.505 INCHES MINIMUM AND 0.515 INCHES MAXIMUM | | BODY LENGTH | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY WIDTH | 0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.997 INCHES MINIMUM AND 1.003 INCHES MAXIMUM | | OVERALL HEIGHT | 0.505 INCHES MINIMUM AND 0.515 INCHES MAXIMUM | | OVERALL LENGTH | 1.282 INCHES MINIMUM AND 1.312 INCHES MAXIMUM | | OVERALL WIDTH | 0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.089 INCHES MINIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT LENGTH | 0.047 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
|
|