|
|
|
National Stock Number:
5905-00-676-7662
Federal Supply Class:
5905
National Item Identification Number:
006767662
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 311-0097-00 | 80009 | TEKTRONIX, INC. | | 311-097 | 80009 | TEKTRONIX, INC. | | 41327 | 34263 | CTS CORP IN TEXAS DBA CTS ELECTRONICS CORP BROWNSVILLE DIV | | GA1N032S201UA | 01121 | ROCKWELL AUTOMATION, INC. | | GW3815B | 01121 | ROCKWELL AUTOMATION, INC. | | TK0097 | 97979 | REON RESISTOR CORP | | DA2011-1S3032 | 97979 | REON RESISTOR CORP |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 200.0 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 0.500 INCHES NOMINAL | | BODY LENGTH | 0.453 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | III FRAGILITY FACTOR | MODERATELY RUGGED | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE LOCATION | AT 10'30 OCLOCK | | NONTURN DEVICE RADIUS | 0.245 INCHES NOMINAL | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT LENGTH | 0.500 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|