| ELECTRICAL RESISTANCE PER SECTION | 20.000 KILOHMS 1ST SECTION AND 25.000 KILOHMS 2ND SECTION AND 25.000 KILOHMS 3RD SECTION AND 10.000 KILOHMS 4TH SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 ALL SECTIONS |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 60.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 120.0 |
| BODY DIAMETER | 1.740 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| BODY LENGTH | 2.562 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| FIXED TAP QUANTITY PER SECTION | 3 1ST SECTION AND 2 2ND SECTION AND 2 3RD SECTION AND 2 4TH SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS PROPORTIONAL CONFORMITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.75 TO 0.75 ALL SECTIONS |
| MAXIMUM RUNNING TORQUE | 1.30 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.90 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.500 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.7400 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| MOUNTING METHOD | THREADED HOLE |
| PILOT DIAMETER | 1.5610 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| PILOT LENGTH | 0.6200 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 4.5 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 4 |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 0.875 INCHES NOMINAL |
| SHAFT STYLE | ROUND |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 0.0 1ST SECTION AND 340.0 1ST SECTION AND 354.0 1ST SECTION AND 0.0 2ND SECTION AND 340.0 2ND SECTION AND 0.0 3RD SECTION AND 340.0 3RD SECTION AND 0.0 4TH SECTION AND 340.0 3RD SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 21 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 10001-1088621 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.561 INCHES MINIMUM AND 1.562 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |