|
|
|
National Stock Number:
5905-00-671-2961
Federal Supply Class:
5905
National Item Identification Number:
006712961
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 2019013 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.01 TO 0.01 SINGLE SECTION | | SHAFT RUNOUT | 0.001 INCHES | | LATERAL RUNOUT | 0.001 INCHES | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT BEARING TYPE | BEARING | | MAXIMUM STOP TORQUE | 320.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | UNDERCUT DIAMETER | 1.615 INCHES MINIMUM AND | | 1.635 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.07300 INCHES MINIMUM AND | | 0.08300 INCHES MAXIMUM | | BODY DIAMETER | 1.747 INCHES MINIMUM AND | | 1.750 INCHES MAXIMUM | | BODY LENGTH | 2.270 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 1.74700 INCHES MINIMUM AND | | 1.75000 INCHES MAXIMUM | | MOUNTING LIP DEPTH | 0.08300 INCHES MINIMUM AND | | 0.10300 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.187 INCHES MINIMUM AND | | 0.1872 INCHES MAXIMUM | | SHAFT LENGTH | 0.540 INCHES MINIMUM AND | | 0.550 INCHES MAXIMUM | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 10800.0 NOMINAL | | MOUNTING METHOD | CLAMP RING | | TERMINAL TYPE AND QUANTITY | 4 SCREW | | TERMINAL LOCATION | REAR END | | SPECIAL FEATURES | MECHANICAL OVERTRAVEL 90 DEG EACH END,INPUT IMPEDANCE 40.0 OHMS MAX AT 400 CPS,OUTPUT IMPEDANCE 50K MIN AT 400 CPS | | OVERALL DIAMETER | 1.747 INCHES MINIMUM AND | | 1.750 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 10001 | | DESIGN CONTROL REFERENCE | 2019013 |
|
|