|
|
|
National Stock Number:
5905-00-660-5688
Federal Supply Class:
5905
National Item Identification Number:
006605688
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 8631496 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | GA53314A6653 | 06KW9 | LUCENT TECHNOLOGIES INC DBA FEDERAL MARKETING GROUP | | GA53314A6653 | 33224 | CENTRAL RESISTOR CORP | | GA53314A6653 | 3B4M0 | LUCENT TECHNOLOGIES INC CORPORATE HEADQUARTERS | | GA53314A6653 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | GA53314A6653 | 80031 | MEPCO/ELECTRA INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 665.000 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 70.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY DIAMETER | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM | | BODY LENGTH | 0.687 INCHES MINIMUM AND 0.843 INCHES MAXIMUM | | INCLOSURE TYPE | HERMETICALLY SEALED | | POWER DISSIPATION RATING IN WATTS | 0.500 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -500.0 TO 200.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -65.0 TO 85.0 | | TERMINAL LENGTH | 1.500 INCHES MINIMUM AND 1.625 INCHES MAXIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 64959-GA53314 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|