9905-00-647-4528 PLATE,IDENTIFICATION Index 1560-00-647-4586 BRACKET,STRUCTURAL COMPONENT,AIR

National Stock Number:
5905-00-647-4554

Federal Supply Class:
5905

National Item Identification Number:
006474554

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
517160-422525INSTRUMENTS AND FLIGHT RESEARCH INC.


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION355.0 MINIMUM AND 357.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER40.0 SINGLE SECTION
BODY DIAMETER2.000 INCHES NOMINAL
BODY LENGTH1.020 INCHES MINIMUM AND 1.035 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
CONTACT ARM ELECTRICAL OFF POSITIONFULLY CCW-CW
FRAGILITY FACTORRUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.50 TO 0.50 SINGLE SECTION
LATERAL RUNOUT0.006 INCHES
MAXIMUM STARTING TORQUE0.80 INCH-OUNCES
MAXIMUM RUNNING TORQUE0.60 INCH-OUNCES
MOUNTING LIP DEPTH0.06200 INCHES NOMINAL
MOUNTING LIP DIAMETER2.00000 INCHES NOMINAL
MOUNTING METHODCLAMP RING
PILOT LENGTH0.07300 INCHES NOMINAL
PILOT DIAMETER RUNOUT0.00150 INCHES
PILOT DIAMETER1.87500 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS4.8 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT BEARING TYPEBALL
SHAFT END PLAY0.00500 INCHES
SHAFT DIAMETER0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM
SHAFT RADIAL PLAY0.002 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT STYLEROUND, SLOTTED
SHAFT LENGTH0.625 INCHES NOMINAL
UNDERCUT DIAMETER1.875 INCHES MAXIMUM
UNDERCUT WIDTH0.09300 INCHES NOMINAL
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
TERMINAL LOCATIONREAR END
TERMINAL TYPE AND QUANTITY3 TURRET


Click here to Register for Free 30-day Trial