5315-00-647-2990 PIN,STRAIGHT,THREADED Index 5905-00-647-2993 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-647-2992

Federal Supply Class:
5905

National Item Identification Number:
006472992

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
B15567598230NATIONAL SECURITY AGENCY


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION50.000 OHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
BODY DIAMETER1.094 INCHES MAXIMUM
BODY LENGTH0.625 INCHES MAXIMUM
BODY STYLECYLINDRICAL BUSHING MOUNTED
DEVICE DESIGN TYPENONTURN AT 9 OCLOCK
FIRST FLAT LENGTH0.438 INCHES NOMINAL
FLAT HEIGHT0.121 INCHES MINIMUM AND 0.123 INCHES MAXIMUM
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-2.00 TO 2.00 SINGLE SECTION
NONTURN DEVICE RADIUS0.531 INCHES NOMINAL
OVERALL DIAMETER1.156 INCHES MAXIMUM
OVERALL LENGTH1.875 INCHES MAXIMUM
MOUNTING BUSHING LENGTH0.250 INCHES NOMINAL
MOUNTING METHODSTANDARD BUSHING
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL
SHAFT LENGTH1.250 INCHES NOMINAL
SHAFT STYLEROUND, FLATTED
TERMINAL LOCATIONFRONT END
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
TEST DATA DOCUMENT98230-B155675 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)


Click here to Register for Free 30-day Trial