| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 309.0 MINIMUM AND 320.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| BODY DIAMETER | 1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| BODY LENGTH | 0.468 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| CUBIC MEASURE | 0.528 CUBIC INCHES |
| DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
| FEATURES PROVIDED | HUMIDITY PROOF |
| FIRST FLAT LENGTH | 1.968 INCHES MINIMUM AND 2.031 INCHES MAXIMUM |
| FLAT HEIGHT | 0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| NONTURN DEVICE RADIUS | 0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
| OVERALL LENGTH | 3.062 INCHES NOMINAL |
| MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES |
| MOUNTING BUSHING LENGTH | 0.344 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| MOUNTING METHOD | STANDARD BUSHING |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 25 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 309.0 MINIMUM AND 320.0 MAXIMUM |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SCREW THREAD DIAMETER | 0.313 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| SECTION QUANTITY | 1 |
| SHAFT BEARING TYPE | SLEEVE |
| SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| SHAFT LENGTH | 2.468 INCHES MINIMUM AND 2.531 INCHES MAXIMUM |
| SHAFT STYLE | ROUND, FLATTED |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-94/5 GOVERNMENT SPECIFICATION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |