|
|
|
National Stock Number:
5905-00-644-5055
Federal Supply Class:
5905
National Item Identification Number:
006445055
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| HAJIM0143 | 44655 | OHMITE HOLDING, L.L.C. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 6.000 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | BODY DIAMETER | 1.562 INCHES NOMINAL | | BODY LENGTH | 1.375 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FIRST FLAT LENGTH | 0.344 INCHES NOMINAL | | FLAT HEIGHT | 0.219 INCHES NOMINAL | | NONTURN DEVICE LOCATION | AT 6 OCLOCK | | NONTURN DEVICE RADIUS | 0.500 INCHES NOMINAL | | OVERALL DIAMETER | 1.719 INCHES NOMINAL | | OVERALL LENGTH | 2.225 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | POWER DISSIPATION RATING PER SECTION IN WATTS | 25.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT STYLE | ROUND, FLATTED | | SHAFT LENGTH | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL LENGTH | 0.157 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|