| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 357.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS 1ST SECTION AND 50.000 KILOHMS 2ND SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ANGLE OF MOUNTING HOLE IN DEG | 60.0 |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| BODY DIAMETER | 2.100 INCHES MAXIMUM |
| BODY LENGTH | 1.555 INCHES MINIMUM AND 1.595 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20 TO 0.20 1ST SECTION AND -0.10 TO 0.10 2ND SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| OVERALL DIAMETER | 2.400 INCHES NOMINAL |
| OVERALL LENGTH | 2.447 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING LIP DIAMETER | 2.1000 INCHES MAXIMUM |
| MOUNTING METHOD | THREADED HOLE |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| MOUNTING LIP DEPTH | 0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM |
| PILOT LENGTH | 0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.00150 INCHES |
| PILOT DIAMETER | 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 1ST SECTION AND -1.0 TO 1.0 2ND SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 2 |
| SHAFT BEARING TYPE | BALL |
| SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| SHAFT END PLAY | 0.00500 INCHES |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -160.0 TO 160.0 1ST SECTION AND -40.0 TO 40.0 2ND SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| UNDERCUT DIAMETER | 1.875 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES MINIMUM |