| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 357.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS 5TH SECTION |
| ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 1ST SECTION |
| ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 2ND SECTION |
| ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 3RD SECTION |
| ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 4TH SECTION |
| ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 6TH SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | DUAL CONCENTRIC |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 20.0 |
| BODY DIAMETER | 1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM |
| BODY LENGTH | 4.026 INCHES MINIMUM AND 4.106 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| LATERAL RUNOUT | 0.002 INCHES |
| MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 7.00 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING METHOD | THREADED HOLE |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.9840 INCHES MINIMUM |
| PILOT DIAMETER | 1.8740 INCHES MINIMUM |
| PILOT LENGTH | 0.0670 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.00150 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 6TH SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 3RD SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -2.0 TO 2.0 5TH SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 1ST SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 2ND SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 4TH SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 6 |
| SHAFT BEARING TYPE | BALL |
| SHAFT END PLAY | 0.00500 INCHES |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.605 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 3450.0 ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -160.0 TO 160.0 1ST SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -160.0 TO 160.0 2ND SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -160.0 TO 160.0 4TH SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -40.0 TO 40.0 3RD SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -40.0 TO 40.0 5TH SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -40.0 TO 40.0 6TH SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 18 TAB, SOLDER LUG |
| UNDERCUT DIAMETER | 1.874 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES MINIMUM |