|
|
|
National Stock Number:
5905-00-165-3209
Federal Supply Class:
5905
National Item Identification Number:
001653209
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 315-022-091 | 07421 | L3HARRIS INTERSTATE ELECTRONICS CORPORATION | | 3200-1430 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. | | 522-102 | 02111 | VISHAY SPRAGUE INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 1.656 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 75.0 SINGLE SECTION | | BODY DIAMETER | 0.875 INCHES NOMINAL | | BODY LENGTH | 1.039 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FEATURES PROVIDED | SWITCH | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION | | LATERAL RUNOUT | 0.001 INCHES | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.312 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1080.0 NOMINAL | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT END PLAY | 0.00500 INCHES | | SHAFT BEARING TYPE | BEARING | | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM | | SHAFT LENGTH | 0.875 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND | | SPECIAL FEATURES | TERMINAL NUMBER ONE OF VARIABLE RESISTOR ALSO TERMINAL OF SWITCH | | SWITCH CONTACT ARRANGEMENT | BREAK BEFORE MAKE | | SWITCH CURRENT TYPE AND RATING IN AMPS | 0.005 DC | | SWITCH OPERATING POSITION | START OF ROTATION | | SWITCH TYPE | ROTARY | | SWITCH VOLTAGE RATING IN VOLTS | 28.0 | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 4 TURRET | | TEST DATA DOCUMENT | 07421-315-022-091 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|