|
|
|
National Stock Number:
5905-00-156-7085
Federal Supply Class:
5905
National Item Identification Number:
001567085
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 4638 | 04454 | SENSOR SYSTEMS, L.L.C. | | 502-5019 | 02111 | VISHAY SPRAGUE INC | | 836553 | 98571 | TELEDYNE CONTROLS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS 2ND SECTION | | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS 1ST SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 0.875 INCHES NOMINAL | | BODY LENGTH | 3.031 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | OVERALL DIAMETER | 0.875 INCHES NOMINAL | | OVERALL LENGTH | 3.522 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.1 FREE AIR ALL SECTIONS | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 1ST SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -2.0 TO 2.0 2ND SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SECTION QUANTITY | 2 | | SHAFT BEARING TYPE | BEARING | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM | | SHAFT LENGTH | 0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM | | SHAFT END PLAY | 0.005 INCHES | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT STYLE | ROUND, SLOTTED | | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
|
|